Universal Day Answer (Uda) - Vodavi STARPLUS STSe Operation Manual

2-330
Features and Operation

Universal Day Answer (UDA)

Description
UDA-assigned CO lines can signal over external page port(s). External Day ringing is
programmed on a system-wide basis in administrative programming. Stations that do not
have access to a line during the day can answer that line while the System is in the day mode
by dialing a UDA code [#5]. To use this feature, a LOOP button or an appearance of the trunk
must be present on the station.
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible Button #19 (Page A) is lit.
4. Press the Page B flexible button (Button #20). The following message displays:
5. Press the UNIVERSAL DAY ANSWER flexible button (Button #7). The following displays:
6. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Universal Day Answer feature is disabled.
Operation
Upon hearing an incoming signal:
1. Lift handset.
2. Dial the UDA/UNA access code [#5] on the dial pad. You are connected to ringing outside
line.
STARPLUS STSe - Programming & Operations Manual
CO L I N E AT T R I B U T E S
S E L EC T A CO L I NE R A NG E
If HOLD is pressed without entering a CO line range, all CO lines are selected.
XXX - XXX PAGE B
E N T E R B U T TO N N U MBE R
XXX-XXX = CO Line Range
U N I VE R SA L D AY A N SW E R
D I S A B LE D
Universal Day/Night Answer
0-1
August 2005