Call Forward - Busy - Vodavi STARPLUS STSe Operation Manual

2-28
Features and Operation

Call Forward - Busy

Description
The Call Forward Busy feature allows a station the ability to have their calls forwarded to a
designated station, a UCD group pilot number, Voice Mail group number, or Hunt group
when their station is busy or in DND.
Operation
To activate Busy Call Forwarding:
1. Lift the handset or press ON/OFF button, press the FWD button or dial [640] on the dial
pad, then dial the Call Forward Busy code [8] on the dial pad.
-or-
Use the Soft Key's BSY-FWD option when in an idle condition.
2. Dial destination number where calls are to be forwarded. Confirmation tone sounds.
3. Replace handset; ON/OFF button extinguishes automatically, if used instead of handset.
To remove Busy Call Forwarding:
1. Lift handset or press ON/OFF button.
2. Either press the FWD button, dial [640] or [662], or use the Soft Key's CLR-FWD option. A
confirmation tone sounds and the FWD LED extinguishes.
3. Replace handset; ON/OFF button extinguishes automatically, if used instead of handset.
SINGLE LINE TELEPHONE
The SLT operation uses the same procedures as used in Digital Telephone operation
described above, except there is no FWD button or Soft Keys. The user must use the feature
codes as described in the keyset section above.
Conditions
»
Conditions are the same as described in the Conditions section of
page 2-25
»
Calls to a station in both Station Call Forward and DND mode follow the forward.
STARPLUS STSe - Programming & Operations Manual
plus those noted in the following bullets.
Call Forward
"Call Forwarding" on
August 2005