Vodavi STARPLUS STSe Operation Manual page 210

2-186
Features and Operation
3. The called station then presses the flashing intercom button to answer the incoming
intercom call. Once the call is answered, the following message displays on the called
station LCD:
Sta XXX can be a programmed station name.
SINGLE LINE TELEPHONE
Not applicable
Conditions
»
If calls are ringing on intercom buttons and a Handsfree call is received, the Handsfree call
is allowed and the calls ringing continue with muted ringing.
»
Multiple intercom path buttons can be assigned to a single station, however up to five
internal parties can be placed on hold per station. Music-On-Hold is provided to the
intercom caller on hold.
»
Once an intercom button is set up on the keyset, callers dialing that station always
receive ringback tone as long as an available intercom button is idle. If all intercom
buttons are in use, the station may use the Camp On or Executive Override features to
reach the station. Internal callers are dropped after the Camp On is answered.
»
This feature can be programmed on any key station or DSS Console with an available
flexible button. If there is an available intercom button, the following actions cannot be
performed: Executive Override, OHVO, Camp On or Override.
»
A call ringing to a station on an intercom button rings muted or reminder ringing,
depending on the stations tone ringing cadence.
»
Up to five internal parties can be placed on hold. No recall timers apply to Intercom
buttons. Internal callers can be placed and removed from hold when they appear on an
Intercom button.
»
To utilize the capability of intercom buttons, busy forward cannot be active at the station.
»
A call ringing to a station on an intercom button and the DND button is pressed, returns
DND tone to the caller and the call is dropped.
STARPLUS STSe - Programming & Operations Manual
C A LL F R O M S TA XXX
M MM D D Y Y H H : MM a m
Intercom
August 2005