Attendant Assignment/Features - Vodavi STARPLUS STSe Operation Manual

Attendant Assignment/Features

Operation
To set the Operation Mode:
1. Press [SPEED] + [SPEED].
2. Press the desired flexible button for programming.
3. Dial [654] + [0] to select the ring mode or dial [654] + [1] to select the speaker mode.
A confirmation tone sounds.
The Mailbox Owner has the following options when a call is sent to a voice
mailbox:
To leave the caller in the voice mail and stop the speaker broadcast, press the ON/OFF
button. The mailbox owner can continue to listen to the message being left without
taking action at their keyset. When the caller disconnects after leaving the voice mail
message, the button returns to solid red and the keyset returns to idle.
To talk to the party leaving the message, press the MUTE key. The station remains in the
CONF mode, and the caller hears the voicemail and the station user.
To pick up the call, press the ANSWERING MACHINE EMULATION flexible button. When
the call is picked up, the voice mail system disconnects from the call, and the voice mail
port returns to the idle (waiting) state. The caller is in a normal talk state with the CO
caller.
SINGLE LINE TELEPHONE
Answering Machine Emulation cannot be used with Single Line Telephones.
Conditions
»
The user must have a digital Keyset.
»
Keyset users must preprogram an ANSWERING MACHINE EMULATION flexible button.
»
After the in-band digits are sent to the voice mail, the station's flexible button status is
checked. The feature is executed based on this check. The result of the check is as follows:
Inactive = no feature operation executed
Active = feature executed as per button function (ring mode or speaker mode)
»
An idle station can press the flexible button to go to the inactive mode. The LED
extinguishes and no answer machine calls are presented to the station.
»
When button is programmed at the station, it is in the inactive mode (LED extinguishes).
»
If the station user answers the call, the normal CO line LCD window displays. The call
timer shows the elapsed time including the time the caller was in VM. The call timer does
not start at 0 in this case.
Attendant Assignment/Features
Refer to Chapter 3, Attendant Features and
STARPLUS STSe - Programming & Operations Manual
Operation.
2-15
Features and Operation
August 2005