Secondary Recorded Announcement; Ucd Available/Unavailable - Vodavi STARPLUS STSe Operation Manual

4-12
Uniform Call Distribution

Secondary Recorded Announcement

Description
A Secondary Recorded Announcement (RAN) may be assigned to the group. This
announcement can be used for follow-up information after the Primary message. This
announcement plays after the Message Interval Timer setting expires.
Programming Steps
1. Press FLASH and dial [60].
2. Enter the UCD Group number (550-565) on the dial pad.
3. Press HOLD.
4. Press the SECONDARY RAN flexible button (FLASH 60, Button #11).
5. Enter number (01-16) for the desired RAN Announcement Table or a (#) to remove the
entry.
6. Press HOLD to save the entry. A confirmation tone sounds and the display updates.

UCD Available/Unavailable

Description
If you are a UCD agent, you may place your station in the Available mode to receive UCD calls,
or you may place your station in the Unavailable mode to block UCD calls from ringing your
station.
The UCD Available/Unavailable DSS/BLF flash rate is the rate at which a DSS appearance for a
station in UCD Unavailable mode flashes. This flash rate can be programmed to 29 different
options identified in the flash rate table. This enables the programmer to customize the key
system configuration to desired flash rates.
Programming Steps
1. Press the UCD UNAVL – DSS/BLF flexible button (FLASH 07, Button #8).
2. Enter a valid number (00-28) on the dial pad to correspond to one of the 29 available
options (refer to
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... UCD Available/Unavailable DSS/BLF flash rate is set for a Red 60 ipm
Double Wink Off (04).
STARPLUS STSe - Programming & Operations Manual
A XXXX SE CO ND A RY R A N 01-16
#
UCD UN AV L D S S / B LF
R E D 6 0 I P M DB L W IN K O F F
Table 2-16 on page 2-163).
Uniform Call Distribution
00-28
August 2005