Initialize Lcr Tables - Vodavi STARPLUS STSe Operation Manual

Programming LCR Tables
Conditions
»
The user must have LCR enabled to get the Call Cost Display.
»
When Call Cost Display is enabled, it changes the entry format for FLASH 75, Button #4 to
include an entry of the cost for one minute.

Initialize LCR Tables

Description
The LCR Tables may be initialized to set all tables to their original, default values. The
following tables are reset to their original default value after initialization of the LCR Tables:
Program
Code
FLASH 75
Programming Steps
1. Press the LCR TABLES flexible button (FLASH 80, Button #7). This message displays:
2. Press the HOLD button. A confirmation tone sounds.
STARPLUS STSe - Programming & Operations Manual
Table B-2: LCR Table Defaults
Flexible
Button
1 3-Digit Area/Office Code Table
2 6-Digit Area/Office Code Table
3 Exception Code Table
4 Route List Table
5 Insert/Delete Table
6 Daily Start Time Table
7 Weekly Schedule Table
8 LCR Routing for Toll Information
I N I T I A LI Z E LC R TAB LE S
P R ES S H O L D
Features
LCR TABLES
Appendix B - Least Cost Routing
Default Value
(after initialization)
None
Table 0
August 2005
B-19