Auto Call Back - Blf Flash Rate; Call Coverage - Vodavi STARPLUS STSe Operation Manual

2-22
Features and Operation

Auto Call Back - BLF Flash Rate

Description
The Auto Call Back BLF Flash Rate is the rate at which the Call Back flexible button flashes.
This flash rate can be programmed to 29 different options identified in the flash rate table.
This enables the programmer to customize the key system configuration to desired flash
rates.
Programming Steps
1. Press the AUTO CBCK BLF flexible button (FLASH 07, Button #7). The following message
displays:
2. Enter a valid number (00-28) on the dial pad to correspond to one of the 29 available
options (refer to
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Auto Call Back BLF Flash Rate is set for a Red 120 ipm Flash (10).

Call Coverage

Description
The Call Coverage feature provides the functionality for stations to answer calls for other
stations by utilizing call coverage buttons. Visual and Audible status of ringing stations to an
assigned coverage station are provided. Multiple coverage stations can have the same
remote ringing station(s) programmed on their stations. Once a coverage station answers the
call, other stations attempting to answer the call receive a busy tone and the call coverage
button extinguishes on all appearances of that button.
The Call Coverage button also functions as a DSS/BLF button for the covered station;
therefore, when the Call Coverage button is pressed, the covered station is called. Also, when
the covered station goes off hook, the Call Coverage button's BLF is lit.
Direct CO calls have ring and LCD priority over call coverage calls. The call coverage station
must have a direct CO appearance or Loop button in order to pick up an external call. If the
call coverage station is in DND, no audible ringing occurs, however visual and LCD
information is presented.
This feature can be programmed by the station user or through admin programming.
DEFAULT ... No call coverage buttons are assigned.
Operation
To assign a Call Coverage Button:
1. Press [SPEED] + [SPEED].
2. Press a desired flexible button.
STARPLUS STSe - Programming & Operations Manual
AUTO CBC K BL F
R E D 1 2 0 I P M F L A S H
Table 2-16 on page 2-163).
00-28
Call Coverage
August 2005