Barge-In Warn Tone - Vodavi STARPLUS STSe Operation Manual

Executive Override

Barge-In Warn Tone

Description
When the Barge-in Warn Tone feature is enabled, it produces a tone to notify a station that
another station is about to use Executive Override or the Barge-in feature to cut into the
existing conversation.
Programming Steps
1. Press the BARGE IN WARN TONE flexible button (FLASH 06, Button #1). The following
message displays:
2. Enter a 0 or 1 on the dial pad to enable/disable the conference tone.
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone sounds.
Privacy is ensured on all communications in the system. If desired, the user may elect to
disable the Barge In feature, thus allowing up to seven other stations to join existing CO
Line conversations.
Station Attempting to
Privacy Enabled
Privacy Disabled
DEFAULT ... Barge-in Warn Tone is enabled.
STARPLUS STSe - Programming & Operations Manual
B A R G E I N WA RN TON E
E N AB LE D
Display stations continue to receive the CONFERENCE display regardless of the
warning tone setting.
Disabling of the Barge In feature may be limited by federal, state, or local law,
so check the relevant laws in your area before disabling privacy.
Table 2-14: CO Line Barge In Flag
Access CO Line
Privacy Enabled
Private
(no cut-through)
Private
(no cut-through)
0-1
CO Line in Use by Another Station
Privacy Disabled
Private
(no cut-through)
Privacy Release
(cut-through allowed)
2-157
Features and Operation
August 2005