Attendant Custom Message - Vodavi STARPLUS STSe Operation Manual

Attendant Custom Message

Attendant Custom Message
Description
The Attendant Custom Message feature allows the first programmed Attendant (system
administrator) to enter up to ten custom messages for system-wide use by station users. Up
to 24 characters may be entered as the custom message (this represent 48 digits entered).
A station user may store any of the available messages under a flexible button assigned as a
Message Access button. These messages may be specified and customized by the customer
on a system-wide basis.
Message status is stored in a battery-protected area of memory for retention in the event of a
power failure or system reset (soft or hard).
Operation
Program the ten custom messages at the first Attendant station as follows:
1. Dial the Custom Message program code [694] on the dial pad. The following message
displays:
2. Enter a valid message bin number [21–30]. The following message displays after the bin
number has been selected.
3. Enter the custom message using the dial pad keys to enter the letters as shown in
Figure 2-19 on page 2-231
Up to 24 alphanumeric characters may be entered for the custom message (this
represents 48 digits entered). The actual characters display as the digits are being
entered while programming the messages.
The Attendant must go idle after programming a message before another message
may be programmed.
4. The Attendant then presses the HOLD button to enter the message and a confirmation
tone sounds.
STARPLUS STSe - Programming & Operations Manual
E N T E R MS G NO
M MM D D Y Y H H : MM a m
mmmmmmmmmm...
E N T E R MS G :
.
Attendant Features and Operation
August 2005
3-7