Vodavi STARPLUS STSe Operation Manual page 75

Call Transfer
To Transfer Search:
When attempting to locate a party, press a DSS button to signal the desired station or press
the TRANS button and dial the desired station number.
If the party is not located:
1. Press another DSS button or press TRANS and dial another station number to continue
the search.
2. When called party answers, hang up to complete the transfer.
To make an Unscreened Transfer:
When called extension begins to signal, hang up to transfer the call (Recall Timer starts).
To make a Trunk-To-Trunk Transfer
1. Press TRANS. The transfer dial tone sounds.
2. Press a CO line / Loop flexible button.
-or-
Dial [9].
-or-
Dial a CO line/group access code.
3. Dial the desired outside line destination number.
4. Hang up to complete the transfer.
SINGLE LINE TELEPHONE
To make a PBX/Centrex Transfer:
1. Press the FLASH button. Intercom dial tone sounds.
2. Dial [660]. A Flash command is presented to the PBX or Centrex CO Line (stutter tone
sounds).
3. Dial desired telephone number.
4. Replace handset to complete transfer.
To activate a Screened Transfer (while connected to an outside line):
1. Press the FLASH button.
2. Dial desired intercom number.
3. Announce the call.
4. Hang up to complete transfer.
To make an Unscreened Transfer:
1. Press the FLASH button.
2. Dial desired intercom number.
3. Hang up to complete transfer.
STARPLUS STSe - Programming & Operations Manual
E911 feature enabled precludes dial 9 access.
LCR feature enabled precludes Loop button access.
2-51
Features and Operation
August 2005