5. Operation
5.1 Front Key Operation
There are ten front keys as shown below.
Power display
The keys have the following functions.
INPUT1
INPUT2
PIP
MENU
PRESET
/F1
/F2
/F3
/F4
CONT/BRT/ENTER : Used to put the contrast, brightness and other settings in memory
If no operation is made within the OSD User Time Out setting, the pre-adjusted settings
are resumed and the OSD disappears.
5.2 Display with a Signal Being Selected
5.2.1 Input Signal Screen Display
SDI - 1080P/60
DVI - 1080P/60
5.2.2 Input Display
SDI
: "SDI"
HD15
: "HD15"
DVI
: "DVI"
VIDEO
: "VIDEO"
S-VIDEO : "S-VIDEO"
5.2.3 Signal Name Display
SD Video line
HD Video line
: Switching of the input signal set to IN1. Switch to each press of the
key.
: Switching of the input signal set to IN2 Switch to each press of the
key.
: Display switching of Picture in Picture.
: Used to display the menu.
: Call of user presets
: Call of Choose Setup menu, Adjustment and User Function.
: Call of Choose Setup menu, Adjustment and User Function.
: Call of Choose Setup menu, Adjustment and User Function.
: Call of Choose Setup menu, Adjustment and User Function.
and to exit.
IN1: "Input" "Signal"
Signal input specified to IN1
When no input signal is set: INx : -
: 480i, 575i
: 720P/50, 720P/60, 1080i/50, 1080i/60, 1080P/50, 1080P/60
(59.94 Hz is expressed as 60 Hz.)
9