Webdav Client Settings - Oce VarioLink 4522c User Manual

2.21 Sending scanned data to the WebDAV server
2.21.2

WebDAV client settings

In the administrator mode of Web Connection, select "Network" ö "WebDAV Settings" ö "WebDAV Client
Settings".
Item
WebDAV TX Set-
ting
Proxy Server Ad-
dress
Proxy Server Port
Number
User Name
Password is
changed
Password
Chunk TX
Connection Time-
out
Server Authentica-
tion Character
Code
VL6522c/VL5522c/VL4522c
Description
Select "ON".
To perform transmissions via a proxy server, enter its ad-
dress.
Format: *.*.*.* (Asterisk * can be 0 to 255)
If the DNS server has already been configured, you can
enter the host name instead.
If "IPv6" is set to "ON", you can also specify the IPv6 ad-
dress.
Enter the port number of a proxy server.
Enter the user name to log in to the proxy server (up to 63
characters).
Select this check box to change the password.
Enter the password to log in to the proxy server (up to 63
characters).
Select whether to enable chunk TX (batch transmission) or
non-chunk TX (split transmission) when sending data to
the WebDAV server.
By default, it is set to "Non-Chunk TX".
Change the setting to fit the target WebDAV server.
Enter the timeout period for a communication with a serv-
er.
Select a character code to perform the authentication un-
der the WebDAV server.
You can use this setting when "Japanese" is specified for
the display language.
2
Prior check
Server address
Server port number
Method supported
by the server
2-73