In Netware 4.X Remote Printer Mode (Nds) - Oce VarioLink 4522c User Manual

2.32 Printing (Netware)
Item
IPX Setting
Ethernet Frame
Type
NetWare Print
Mode
Print Server Name
Print Server Pass-
word
Polling Interval
Bindery/NDS Set-
ting
File Server Name

In NetWare 4.x Remote Printer mode (NDS)

1
From the client, log in the NetWare file system with administrator authority.
2
Start NWAdmin.
3
Select an organization or department container for the print service, and select "Print Services Quick
Setup" from the Tools menu.
4
Fill in "Print Server Name", "Printer Name", "Print Queue Name", and "Print Queue Volume". Then, set
the "Type" of the printer to "Other/Unknown" and save them.
5
Load the PSERVER.NLM file on the NetWare Server console.
Then, configure the following settings in "NetWare Setting".
Item
IPX Setting
Ethernet Frame
Type
NetWare Print
Mode
Print Server Name
Printer Number
VL6522c/VL5522c/VL4522c
Description
Select "ON".
Select a frame type to be used.
Select "PServer".
Enter a print server name to be operated as Pserver (up to
63 characters, excluding / \ :; , * [ ] < > | + = ? .).
Enter a print server password if necessary (up to 63 char-
acters).
Set a job inquiry interval.
Select "Bindery/NDS Setting".
Enter the priority file server name to be used in the Bindery
emulation mode (up to 47 characters, excluding /\ :; , * [ ]
< > | + = ? .).
Description
Select "ON".
Select a frame type to be used.
Select "Nprinter/Rprinter".
Enter a print server name to be operated as the Nprint-
er/Rprinter (up to 63 characters, excluding / \ :; , * [ ] < > |
+ = ? .).
Enter the Nprinter/Rprinter number.
2
Prior check
Frame type
The print server
name specified in
Step 4
Prior check
Frame type
The print server
name specified in
Step 4
2-107