Specifying Client (Windows) Settings When Using The Netware Server - Oce cm4521 User Manual

Setting up network printing
9
In "Connection type", select "Remote (LPR on IP)", and then register it.
10
Enter the IP address set for this machine as the host address, enter
"Print" as the printer name, and then click the [Finish] button to register
the settings.
11
The printer driver registration screen appears. Select "None" for each
operating system to complete the registration.
!
Detail
For printer user rights, printer notification options, and assignment of
queues, refer to the NetWare documentation, and specify the settings as
necessary.

Specifying client (Windows) settings when using the NetWare server

1
For Windows 2000/NT 4.0, click the [Start] button, point to "Settings",
and then click "Printers".
For Windows XP/Server 2003, click the [Start] button, and then click
"Printers and Faxes".
– If "Printers and Faxes" does not appear in the Start menu, open the
Control Panel from the Start menu, select "Printers and Other Hard-
ware", and then select "Printers and Faxes".
2
For Windows 2000/NT 4.0/Server 2003, double-click the "Add Printer"
icon.
For Windows XP, click "Add a printer" on the "Printer Tasks" menu.
The Add Printer Wizard starts up.
3
In the port settings, browse the network, and specify the name of the
created queue (or NDPS printer name).
4
From the printer model list, specify the desired folder on the CD-ROM
that contains the printer driver.
– Select the specified folder according to the printer driver to be
used, the operating system, and the language.
– Printer drivers that can be selected:
Windows 2000/XP/Server 2003: PCL driver, PS driver
Windows NT 4.0: PCL driver
5
Follow the on-screen instructions to complete the installation.
cm4521
3
3-35