Configuring Settings To Send Or Receive Faxes; Tx/Rx Settings - Oce VarioLink 4522c User Manual

2
2.63.3

Configuring settings to send or receive faxes

Configure settings related to transmission and reception of faxes including file handling at the time of a polling
transmission and printing method at the time of reception of a fax.

TX/RX settings

In the administrator mode of Web Connection, select "Fax Settings" ö "TX/RX Settings".
Item
Duplex Print (RX)
Letter/Ledger over
A4/A3
Print Paper Selection
Print Paper Size
Incorrect User Box No.
Entry
Rx from Rejected Fax
No
Tray Selection for RX
Print
Min. Reduction for RX
Print
Print Separate Fax
Pages
File After Polling TX
No. of Sets (RX)
2-272
Description
Select whether to print a received fax on both side of sheets.
Specify whether to use paper in inch-sized paper first when printing received
faxes.
Select the priority order of paper trays used to print received faxes.
If you select "Priority Size", received faxes are printed on paper of the priori-
tized size. If the prioritized size is not specified, received faxes are printed on
paper of the nearest size.
If you select "Fixed Size", receive faxes are always printed on paper of the
specified size.
If "Tray Selection for RX Print" is set to other than "Auto", this item will be set
to "Auto Select".
Select the size of paper used to print received faxes.
Select an action to be taken when the unregistered User Box number is spec-
ified when a fax is received by using User Boxes.
This item is not available.
If you want to fix the paper tray used to print received faxes, select the paper
try.
If "Print Paper Selection" is set to other than "Auto Select", this item will be set
to "Auto".
Specify a reduction ratio of received faxes.
When a receive fax does not fit within the standard paper size, this setting is
used to adjust the size.
Select whether to divide a received fax into two or more pages when the doc-
ument is larger than the standard paper size.
Specify whether to delete a file after completing polling transmission of the file.
If you need two or more sets of a received fax, specify the number of sets.
Settings under "Fax Settings"
VL6522c/VL5522c/VL4522c
2.63