2.54
Linking an OpenAPI system with this machine
2.54.3
Device Certificate Setting
Configure settings for SSL communication.
For details, refer to page 2-18.
2.54.4
OpenAPI Setting
In the administrator mode of Web Connection, select "Network" ö "OpenAPI Setting".
Item
Use SSL/TLS
Port Number
Port Number (SSL)
Reference
-
If the enhanced security mode is enabled, "Use SSL/TLS" is automatically set to "SSL Only".
-
When you use Authentication Manager for authentication from the printer driver, set "System
Connection" ö "OpenAPI Settings" ö "Authentication" to "OFF" in administrator settings on the
control panel.
-
If you select [OK] after changing multiple port numbers together in Web Connection or on the control
panel, a port number duplication error may be displayed. When this error is displayed, first change one
port number and select [OK]. Then change another one and select [OK].
VL6522c/VL5522c/VL4522c
Description
To use SSL encryption, select "SSL Only" or "SSL/Non-
SSL".
Enter the port number.
Enter the port number to be used for SSL communication.
2
Prior check
Do you use
SSL/TLS?
2-185