Oce VarioLink 4522c User Manual page 196

2.52 Using IEEE802.1X authentication
2.52.3 IEEE802.1X Authentication Setting
In the administrator mode of Web Connection, select "Network" ö "IEEE802.1x Authentication Setting" ö
"IEEE802.1x Authentication Setting".
Item
Authentication Sta-
tus
IEEE802.1X Au-
thentication Set-
ting
Supplicant Setting
User ID
Password is
changed.
Password
VL6522c/VL5522c/VL4522c
Description
The authentication status is shown as follows.
• Authenticated: The authentication has completed.
• Authenticating: The authentication is in progress.
• Unauthenticated: Not authenticated status
• Authentication Failed: The authentication has failed.
• Failed to Retrieve Status: No authentication status
could be obtained.
When you press [Refresh], the authentication status is up-
dated.
Select "ON".
Configure settings required in order for this machine,
which is a supplicant (authentication client), to receive au-
thentication from the authentication server.
Configure settings to fit your environment.
Enter a user ID (up to 128 characters).
This user ID is used for all EAP-Type options.
Select this check box to change the password.
Enter the password (up to 128 characters).
The password is used for all EAP-Type options other than
"EAP-TLS".
2
Prior check
2-177