Oce VarioLink 4522c User Manual page 262

2.62 Settings under "Store Address"
Registering a new "E-mail" destination
Item
No
Name
Index
E-mail
Registration of Certifi-
cation Information
Limiting Access to Des-
tinations
Registering a new "FTP destination"
Item
No
Name
Index
Host Address
File Path
User ID
Password is changed
Password
anonymous
PASV Mode
Proxy
Port No.
Limiting Access to Des-
tinations
VL6522c/VL5522c/VL4522c
Description
Specify the registration number of the destination.
If you select "Input directly", enter the registration number.
Enter the destination name (up to 24 characters).
Select the index character used when searching for the destination.
It is convenient to select the "Main" check box for a frequently used destina-
tion.
Enter the E-mail address of the destination (up to 320 characters).
Select this check box to register certificate information.
Click [Browse] to specify the certificate to be registered. Only the DER (Distin-
guished Encoding Rules) formatted file is supported for registration of certifi-
cate information.
To delete the registered certificate information, select "Deletion of Certification
Information".
You cannot register a certificate if the E-mail address of the destination does
not match that of the certificate. Before registering a certificate, check that
those E-mail addresses are the same.
Click [Display] to display the current settings for limiting access to destina-
tions.
Specify the access allowed level or reference allowed group required to ac-
cess this destination.
Description
Specify the registration number of the destination.
If you select "Input directly", enter the registration number.
Enter the destination name (up to 24 characters).
Select the index character used when searching for the destination.
It is convenient to select the "Main" check box for a frequently used destina-
tion.
Enter the IP address of the destination FTP server.
Format: *.*.*.* (Asterisk * can be 0 to 255)
If the DNS server has already been configured, you can enter the host name
instead.
If "IPv6" is set to "ON", you can also specify the IPv6 address.
Specify the destination directory (up to 127 bytes).
Enter the user ID to log in to the destination FTP server (up to 63 bytes).
Select this check box to change the password.
This item is displayed when editing the registered information.
Enter the password to log in to the destination FTP server (up to 63 bytes, ex-
cluding space and ").
Select whether to allow anonymous users to access the FTP server.
Select whether to communicate in PASV mode.
Select whether to use a proxy server.
Enter the port number.
Click [Display] to display the current settings for limiting access to destina-
tions.
Specify the access allowed level or reference allowed group required to ac-
cess this destination.
2
2-243