In The Netware 4.X/5.X/6 Print Server Mode (Nds) - Oce VarioLink 4522c User Manual

2

In the NetWare 4.x/5.x/6 Print Server mode (NDS)

0 When you select the Print Server mode, the IPX protocol must already be loaded on the NetWare server.
1
From the client, log in the NetWare file system with administrator authority.
2
Start NWAdmin.
3
Select an organization or department container for the print service, and select "Print Services Quick
Setup (non-NDPS)" from the Tools menu.
4
Fill in "Print Server Name", "Printer Name", "Print Queue Name", and "Print Queue Volume". Then, set
the "Type" of the printer to "Other/Unknown" and click [Create].
Then, configure the following settings in "NetWare Setting".
Item
IPX Setting
Ethernet Frame
Type
NetWare Print
Mode
Print Server Name
Print Server Pass-
word
Polling Interval
Bindery/NDS Set-
ting
NDS Context
Name
NDS Tree Name
2-108
Description
Select "ON".
Select a frame type to be used.
Select "PServer".
Enter a print server name to be operated as Pserver (up to
63 characters, excluding / \ :; , * [ ] < > | + = ? .).
Enter a print server password if necessary (up to 63 char-
acters).
Set a job inquiry interval.
Select "NDS".
Enter an NDS context name for print server connection (up
to 191 characters, excluding / \ :; , * [ ] < > | + = ?).
Enter an NDS tree name for print server connection (up to
63 characters, excluding / \ :; , * [ ] < > | + = ?).
Printing (Netware) 2.32
Prior check
Frame type
The print server
name specified in
Step 4
VL6522c/VL5522c/VL4522c