Key Points For Mmb Design; Redundant Configuration - Fujitsu primequest 2400E2 Design Manual

3.1 Key Points for MMB Design

When focusing on reliability, install two MMBs to create a


redundant configuration

Considerations Before Setting an MMB

IP address, host name, subnet mask, and gateway address

User accounts

Name of the PRIMEQUEST system (this is also used as the SNMP system

name.)
Management VLAN (virtual IP addresses, etc.) environment

For details, refer to "2.2 Key Points for the MMB Settings" in
"Linux (RHEL) Installation Guide" and "3.3 Connection and Setting of MMB"
in "Installation Manual".
PRIMEQUEST 2000 Series Design Guide 62 Copyright 2016-2017 FUJITSU LIMITED