Table of Contents
Advertisement
CONNECTING
THE
PERSONAL COMPUTER
1.
Ensure that both the machine and the PC are
switched off and/or disconnected from the electri-
cal power supply.
2.
Connect the interface cable connector to the par-
allel port on the rear right of the fax machine.
3.
Connect the other end to a parallel port on the PC.
4.
Reconnect the fax machine and the PC to the
electrical power supply and switch them on.
LOADING THE SOFTWARE
The software that allows operation as a printer, scan-
ner or fax machine from a PC is supplied with the
machine.
Minimum machine requirements
• For Windows 95 or Windows 98, first edition:
Pentium 166MHz, 32 MB RAM.
(The Service Pack Microsoft Windows 95 OSR1
is recommended.)
• Forr Windows 98 second edition, or Windows
NT4: Pentium 166MHz, 64 MB RAM.
(If you use Windows NT, make sure that the
Service Pack Microsoft Windows NT4 or higher
is already installed.)
All models require at least a VGA monitor (24-bit
board for colour video) and an IEEE 1284 ECP parallel
interface connection.
I
NSTALLATION
MACHINE
TO
A
Installing "Linkfax Pro@" software ...
The installation CD contains a fax/PC interconnec-
tion program, a printer driver, a scanner driver and
on-line documentation files that contain further in-
formation on how the machine functions in a PC envi-
ronment.
The drivers and documentation files that will be
copied to your hard disk drive during installation
will occupy about 20 MB of disk space.
Installation of the Linkfax Pro software will clear
any current modem, printer, etc., settings on your
PC.
1.
Ensure that all applications on your PC are closed.
2.
Insert the installation CD provided with the ma-
chine, in the CD-ROM drive of your PC.
3.
The installation procedure starts automatically.
4.
Follow the instructions that appear on your PC
monitor.
If your computer does not have a CD-ROM drive, 3.5"
floppy disks may be created on another computer,
using the floppy creation function on the installation
CD. To do this you will have to use a computer that
has both a CD-ROM drive and a 3.5" floppy disk drive.
To create floppy disks, follow the procedure shown on
the introductory screen of the installation program.
For the correct functioning of Internet Linkfax, you
must configure your electronic mail application to rec-
ognise and use the Message Application Programme
Interface (MAPI). Before selecting this option, you
must close the Internet Linkfax application.
Once the configuration procedure is completed, you
must restart your PC.
The machine is now able to function as a printer,
scanner and PC-fax. For further information on indi-
vidual functions, read the specific sections (Printer
functions, Scanner functions, PC-fax functions) or
consult the electronic documentation installed with the
drivers.
13
Advertisement
Table of Contents
