Table of Contents
Advertisement
PAPER WEIGHTS
Single sheets
Weight allowed for single sheets:
Weight recommended for single sheets *:
Envelopes
Weight allowed for envelopes:
Recommended weight for envelopes:
Cards
Weight allowed for cards:
Recommended weight for cards:
Banners
Weight allowed for banners:
Recommended weight for banners:
Transparencies
Thickness of film permitted:
Thickness of film recommended:
* For best results, use of 80 g/m
The use of single sheets having a weight of between 60 and 70 g/m
copying texts.
PRECAUTIONS
•
Use of poor quality paper can adversely affect
the quality of the print/copy.
•
Check that the sheets of paper are loaded
without impediment, and that there is not too
much or insufficient play.
•
Sheets of paper and envelopes must not be bent,
creased or torn, as this may cause them to jam or
prevent them from being fed correctly into the
machine. Only use paper that is in good condition
and meets the requirements listed in this chapter.
•
Only load paper of the same format and
thickness into the ASF at any one time.
•
Printing on both sides of sheets increases the
risk of jamming or feed anomalies and could
cause the ink to smudge.
•
NEVER attempt to print on the back of
envelopes.
P
APER AND OTHER PRINT MEDIA
ASF min.
g/m
2
lb.
64
16
70
19
75
20
80
21
100
27
100
27
90 µm
100 µm
2
(21 lb.) single sheets is recommended.
ASF max.
Manual min.
g/m
2
lb.
g/m
2
120
32
60
90
24
100
27
75
150
39
100
135
36
70
80
125 µm
90 µm
120 µm
2
(inclusive) is recommended only for printing or
•
When using special print media print ONLY on
the side of the paper marked as being the print
side.
•
When adding paper to the ASF, insert it BEHIND
the paper already loaded. It is preferable that all
the paper be reloaded together.
•
When using special print media, read carefully
the manufacturer's instructions on the packaging.
•
Note that pages with a high print density will tend
to curl. Such pages may mark the back of the
sheet stacked above them, because they require
a longer drying time.
A specific option may be selected via the Printer
Monitor (Drying Time). Alternatively, remove the
document from the machine immediately and
leave it to dry before handling it.
Manual max.
lb.
g/m
2
lb.
16
200
50
20
120
32
27
200
50
19
90
24
21
125 µm
19
Advertisement
Table of Contents
