Olivetti JET-LAB 600@ User Manual page 71

Adjusting the volume of line tones ...
If the volume of either the line or connection signal
tones seems too loud or too quiet, change it using the
key.
1.
Ensure that the display shows the initial waiting
mode and the date and time.
RX ON FAX
28-10-99
2.
Press the LINE key.
TYPE NUMBER
_
3.
Press the key to reduce or increase the
speaker volume.
4.
Press the LINE key again, or the STOP key, to
return the fax machine to the initial waiting mode.
RX ON FAX
28-10-99
56
Adjusting the volume of the acoustic
warning tone ...
1.
2.
100%
11:45
3.
4.
5.
100%
11:45
6.
7.
8.
Ensure that the display shows the initial waiting
mode and the date and time.
RX ON FAX
29-10-99
Press the FUNCTION key.
1.MEMORY TX
/1-9
Press 8 on the numeric key pad.
8.SETUP
/1-9
Press the START key.
DATE AND TIME
Press the FUNCTION key.
VARIOUS SETTINGS
Press the START key until the display shows:
BUZZER VOL.:LEV.4

         
Press the
available: «LEV.5», «LEV.6», «LEV.7», LEV.8»,
«VOL.WARN.:NO», «LEV.1», «LEV.2», «LEV.3».
BUZZER VOL.:LEV.8
Press the START key to confirm this choice, then
press the STOP key to return the fax machine to
the initial waiting mode.
RX ON FAX
29-10-99
100%
16:28
100%
16:28
F
ACSIMILE