Olivetti JET-LAB 600@ User Manual page 66

Changing the ring volume ...
If you wish, you can also change the ring volume as
follows:
1.
Ensure that the display shows the initial waiting
mode and the date and time.
FAX/PHONE
28-10-99
2.
Press the FUNCTION key.
1.MEMORY TX
3.
Press 8 on the numeric key pad.
8.SETUP
4.
Press the START key:
DATE AND TIME
5.
Press the FUNCTION key.
VARIOUS SETTINGS
6.
Press the START key until the display shows:
RING VOL.:LEV.4

      #  
7.
Press the
available: "RING VOL:NO", "RING VOL.:LEV.5",
"RING VOL.:LEV.6", "RING VOL.:LEV.7", "RING
VOL.:LEV.8", "RING
VOL.:LEV.2", "RING VOL.:LEV.3".
RING VOL.:LEV.2
8.
Press the START key to confirm this choice, then
press the STOP key to return the fax machine to
the initial waiting mode.
FAX/PHONE
28-10-99
F
ACSIMILE
100%
16:28
/1-9
/1-9
VOL.:LEV.1", "RING
100%
16:28
Recognising ring tones ...
In some countries it is possible to assign two or more
numbers to the same telephone line corresponding
to different users. When a call is made, a different ring
will indicate which user should reply.
This feature is very useful in a domestic or small office
environment where the telephone line is shared
between a number of people.
Your fax machine can "learn" one of these tones .
This way (in " FAX/PHONE " and " FAX/TAD " reception
mode) it will always prepare itself to receive a
document when the incoming call has this specific
tone. If, however, you pick up the receiver
immediately, you can talk to the caller, in the case of a
telephone call.
If the tone is not recognised , the fax machine will
continue to ring until you raise the receiver.
This feature is particularly useful when associated
with silent reception as the fax machine will only ring
for a telephone call.
For further information about access to this service,
contact the telephone network manager.
If an answering machine is connected to the fax
machine , we advise you to disconnect it before
activating the recognition procedure.
1.
Ensure that the display shows the initial waiting
mode and the date and time.
FAX/PHONE
28-10-99
2.
Press the FUNCTION key.
1.MEMORY TX
3.
Press 9 on the numeric key pad.
9.INSTALLATION
4.
Press the START key:
TEL.LINE SETUP
5.
Press the FUNCTION key.
ENHANCED FEATURES
100%
16:28
/1-9
/1-9
51