Olivetti JET-LAB 600@ User Manual page 10

BLACK/WHITE COPIES
Sets/starts B/W copy operation.
COLOUR COPIES
Starts colour copy operation.
LED ERROR INDICATOR.
Indicates malfunction during transmission or re-
ception.
LED TX/RX INDICATOR
On, indicates that transmission or reception is in
progress.
Off, indicates that there is no transmission or re-
ception in progress.
STOP
With the machine in waiting mode, interrupts the
copy operation in progress.
Ejects the original document from the ADF.
Turns off the "ERROR" LED.
With the machine in programming mode, re-
turns the machine to the initial waiting mode.
Interrupts programming in progress.
With the machine in communication mode, in-
terrupts the transmission or reception operation in
progress.
All modes, eliminates an error status, resetting
to the correct operating status.
START
With the machine in waiting or connect mode,
after dialling a fax number, starts transmitting
(only with the original inserted into the ADF).
With the machine in programming mode, con-
firms the selection of menus, submenus, settings
and corresponding values and moves on to the
next step.
With the machine in connect mode, starts re-
ception of a document.
O
PERATOR PANEL
LINE
With the machine in waiting mode, connects to
the telephone line, permitting the dialling of the
number to be call.:
NUMERIC KEY PAD (0 - 9
With the machine in waiting mode, if
pressed for more than one second, auto-
matically select s (where programmed) a
telephone/fax number or internet address.
With the machine in waiting or con-
nect mode, used to dial telephone or
fax numbers.
With the machine in programming
mode, can be used to type in any
number/letter combination.


With the machine in programming mode, scrolls
∼
forward to select national characters and sym-
bols, when typing in names.
Types remote control commands.
With the machine in connect mode, where tone
(multifrequency) dialling is used, gives a special
tone for special network services.
With the machine in programming or connect
mode, temporarily changes from pulse (decadic)
to tone (multifrequency) dialling.
#
With the machine in programming mode, scrolls
&...
back to select national characters and symbols
when typing names.
With the machine in connect mode, sends a
tone for special network services where tone dial-
ling is used.
If, during any operation, you do nothing for more
than two minutes, the machine automatically re-
turns to the initial waiting mode.
)
IX