Table of Contents
Advertisement
MOUNTING
THE
ORIGINAL
OUTPUT TRAY ...
Mount the original document output tray, by pushing it
into the appropriate slot. It will receive the original
documents that have been transmitted or copied.
CHANGING
THE
MESSAGES ON THE DISPLAY ...
If messages on the display appear in a foreign lan-
guage, you can changed the language by choosing
another from those available as follows:
1.
Press the FUNCTION key.
1.MEMORY TX
2.
Press 9 on the numeric key pad.
9.INSTALLATION
3.
Press the START key,
TEL. LINE SETUP
4.
Press the FUNCTION key until the display shows:
LANGUAGE
5.
Press the START key.
6.
Press
require.
7.
Press the START key and then the STOP key.
6
DOCUMENT
LANGUAGE
FOR
/1-9
/1-9
you
LOADING PAPER ...
The automatic sheet feeder (ASF) can contain up to 200
sheets of 80 g/m
2
paper which are used to print re-
ceived documents or to photocopy any type of original.
The ASF can hold paper sizes A4 (210 x 297 mm), US
Letter (8.5 x 11 in) and US Legal (8.5 x 14 in) in
weights ranging from 70 g/m
2
To load paper
1.
Open the ASF cover.
2.
Fan the sheets of paper thoroughly and square
them up into a single block.
to 90 g/m
2
.
I
NSTALLATION
Advertisement
Table of Contents
