Print/Cancelling Documents Addressed To The Pc Which Are Currently Stored In The Fax Memory - Olivetti JET-LAB 600@ User Manual

Multifunction ink jet fax
Table of Contents

Advertisement

PRINTING/CANCELLING DOCUMENTS AD-
DRESSED
TO
THE
CURRENTLY STORED IN THE FAX MEMORY
To print/cancel documents in the memory which are
addressed to the PC, proceed as follows:
1.
Make sure that the display shows the initial
waiting mode and the date and time.
RX ON FAX
29-10-99
2.
Press the FUNCTION key.
1.MEMORY TX
3.
Press 7 on the numeric key pad.
7.DOC. RX FOR PC
4.
Press the START key.
If you have set a password, the display will show:
TYPE PASSWORD:
_
Otherwise, PRINT LIST will be displayed
immediately.
5.
Type the password.
If the password entered is incorrect, the display
will show:
WONG CODE
xxxx
Three attempts can be made to enter the
password, after which the fax machine will return
to the initial waiting mode.
On typing the correct password, if there is any
document stored for the PC, the display will show:
PRINT LIST
Otherwise the first line of the display shows
"EMPTY" and then the initial waiting mode..
6.
Press the START key to print the list of
documents stored in the memory, or press
   $         
the
DOC.SEARCH
F
ACSIMILE
PC
WHICH
ARE
100%
14:42
/1-9
/1-9
7.
Press the START key.
DOC.NO. #xxxx
        !
8.
Press the
identification list, then press the START key to
select the required document, otherwise select
the highlighted document directly by pressing the
START key:
PRINT DOCUMENT
9.
Press the START key to print the selected
document or press the
DOC. CANCEL
10.
Press the START key to cancel the document and
           
the
documents, otherwise press the STOP key to exit
this procedure.
If the START key is pressed, the selected
document is cancelled and an updated list of
stored documents will be reproposed. If the
document has not been printed, a warning
message «ATTENTION NOT PRINTED» will
appear briefly and the display will show:
DOC. CANCEL
11.
Press the START key to confirm cancellation of
the document or the STOP key to exit this
procedure.

This procedure is ONLY active when the PC is
OFF and/or the application is closed. As soon as
the PC is switched on and/or the application is
opened, any messages in the memory will be
automatically downloaded to the PC.


/
key.
65

Advertisement

Table of Contents
loading

Table of Contents