Olivetti JET-LAB 600@ User Manual page 9

Multifunction ink jet fax
Table of Contents

Advertisement

PRINT HEAD
With the machine in waiting mode, enables the
print head to be inserted/changed.
With the machine in connect mode, adjusts the
volume of line tones after the
pressed.
RESUME
All modes, eliminates faulty status, resetting cor-
rect operating parameters.
RESOLUTION
With the machine in waiting mode, sets the
resolution of documents to be transmitted (only
with the document inserted into the ADF).
With the machine in waiting mode and after
pressing the
key, the last ten telephone or
fax numbers dialled are scrolled forward.
With the machine in programming mode, scrolls for-
ward the parameter setting values.
PAUSE
With the machine in waiting or connect mode,
inserts a pause during direct dialling or program-
ming of one-touch or speed dial numbers.
LAST CALLS (RE-SELECTION)
With machine in waiting mode, and with no
document inserted, displays a list of incoming
and outgoing calls.
With a document inserted, indicates the last fax
or telephone number dialled/answered.
(FUNCTION)
With the machine in waiting mode, accesses the
programming functions.
With the machine in programming mode, and
followed by a numeric key, selects the first level
of the programming menu.
(Successive pressings – instead of the numeric
key - also permit selection of the first menu level.)
Within the programming menu, selects the vari-
ous parameters and sub-menus.
When setting the time, changes between p.m.
and a.m. (when the 12 hour format is chosen)
The following function is only enabled in
some countries.
With the machine in waiting or connect mode, if
pressed while dialling a telephone or fax number,
enables the number to recognise a second tone
during dialling, if connected to certain types of
switchboard.
↔ a
↔ ↔
A↔
With the machine in programming mode, se-
lects lower/upper case characters when entering
internet addresses.
VIII
key has been
The following SIX keys are active only in COPIER mode.
With the machine connected to a private
switchboard:
With the machine in waiting or connect mode, if
pressed once before dialling a telephone or fax
number, connects to the public telephone line.
If pressed twice before dialling a telephone or fax
number, routes the call to the programmed alter-
native carrier.
With the machine is connected to a public
line:
With the machine in waiting or connect mode, if
pressed before dialling a fax or telephone num-
ber, routes the call to the programmed alternative
carrier.
With the machine in programming mode, in
both the above cases, has the same functions for
programmed one-touch and speed dial numbers.
With the machine in waiting mode, allows ac-
cess to Internet features and functions.
With the machine in programming mode, allows
internet addresses (including the "@" character)
to be entered and stored during programming.
With the machine in connect mode, and with the
handset off the hook, allows access to special
functions made available by the carrier, com-
monly known as REGISTER RECALL (function
R).
Two 16-character lines are used to in-
dicate the machine's status, menu and
sub-menu items, settings and corre-
sponding values.
I
MAGE
Controls two functions: the LIGHT/DARK contrast
and the colour SATURATION.
REDUCTION/ENLARGEMENT
Allows reduction/enlargement of the original to
suit the format of the paper used for copying.
PAPER
Allows choice of type of paper to be used for
copies.
*QUALITY
Allows choice of copy quality.
O
PERATOR PANEL

Advertisement

Table of Contents
loading

Table of Contents