Special Dialling Cases - Olivetti JET-LAB 600@ User Manual

SPECIAL DIALLING CASES ...

The dialling procedure described at step 3 (procedure
A) and at step 4 (procedure B) changes in the
following cases:
• The fax machine is connected to a private line.
Before dialling the number, connect to the public
line by pressing . The display will show an "E"
(external).
If the mode required by your telephone exchange
is different from the one set on your fax machine,
reprogramme it according to the required external
connection mode (see "Connecting to a private
line PBX").
• Temporary modification of the dialling mode.
If the fax machine is set for pulse dialling (see
"Configuring the fax to the telephone line"), to
modify the setting temporarily for tone dialling,
*
press the key before or while dialling the
number.
At the end of the transmission, the fax machine will
restore the preset dialling mode.
• You want to call the recipient again without
redialling their number.
The fax machine always stores the last 10
numbers dialled (except for transmissions from
memory). You can redial any of these numbers,
qith your documnt already in the ADF, by pressing
                the following keys in sequence:
the transmission does not take place in spite of
automatic redialling attempts.
• The recipient belongs to another area code.
If the recipient belongs to another area code,
when using a pulse dialling mode to insert a pause
(PAUSE) between the international code, the
area code and the recipient's telephone number.
The display shows a "P" (pause).
• The recipient is connected to a telephone
exchange accessed by detection of a second tone.
To enable the dialled number to detect a second
tone of the telephone exchange, press the F
(FUNCTION) key while dialling the number. The
display shows ":" (this feature is only enabled in
some countries).
F
ACSIMILE
• If you want to listen to the line tones while dialling
without lifting the handset (hands free).
The fax machine is already enabled to listen both
to the connection signals and to the line tones. If
this is not the case, read the following procedures
or see "To hear the connection signal" in "For
more sophisticated use".
Procedure:
i.e.:
1.
Connect to the line by pressing the HOOK key on
the fax machine.
2.
Dial the recipient's number on the numeric
keypad on the fax machine.
3.
Press the START key to start the transmission.


(REDIAL),
• If you want to use rapid dialling procedures.
The fax machine also has rapid dial features: one
touch dial and speed dialling. To use these
features, you must programme them as described
in "Programming one touch dial and speed
dialling".
Once you have programmed them, it will be
sufficient to press one key (one-touch dial) or the
(speed dialling) to
"Transmitting with one touch dial" and
"Transmitting with speed dialling").



TYPE NUMBER
_
TYPE NUMBER
011 230087
key followed by a two digit numeric code
dial a number (see
29