Machine - Olivetti d-Copia 4200MF Manual

Part Names and Functions

Machine

This chapter explains the names of parts when the machine is used as a fax machine.
For the parts required when functions other than FAX are used, refer to the machine's Operation Guide.
2
* The operation panel may differ from the above illustration depending on the type of your machine.
1 Operation panel
2 Main power
switch
3 MP (Multi
Purpose) tray
4 LINE connector
(L1)
5 LINE connector
(L2)
6 TEL connector
(T1)
IMPORTANT: You cannot automatically receive a fax when the main power switch is turned off. To receive
faxes with the power turned off, press the Power key on the operation panel.
1-4
1
Perform the fax operation with this panel.
Set this switch to the ON (|) side when
performing the fax or copier operation. The
touch panel lights to enable operation.
Set the paper in this tray when using a type of
paper other than the cassette (e.g., when
using special paper).
Connect the modular cord for the telephone
line to this connector. This connector is Port 1.
If you install 2 optional FAX Kits (Dual FAX
option), you can use Port 2. Connect the
modular cord for the telephone line to this
connector.
When using a commercially available
telephone set, connect the modular cord to
this connector.
5
4
6
3
OPERATION GUIDE