Table of Contents
Advertisement
4.
Remove the print head from its compartment.
5.
Remove the new print head from its package and,
holding it by the grip, peel off the protective film.
Avoid touching both the nozzles and the electrical
contacts.
102
6.
Insert the new print head in its compartment with
the electrical contacts facing towards the back of
the machine.
7.
Push the print head in the direction indicated by
the arrow until a click is heard, confirming that it
has been correctly inserted.
8.
Close the print head compartment cover, and
press the
key again.
The machine will automatically check the print
head and the display will show: "INST. PRINT
HEAD. PLEASE WAIT" for a few seconds.
When you have replaced the print head because it
was out of ink, the machine will recognise that it has
been replaced and the display will show: "NEW PRINT
HEAD? 1 = YES, 0 =NO". Press the 1 key on the
numeric keypad. The machine will recommend
aligning the print head.
M
AINTENANCE
Advertisement
Table of Contents
