Inserting Documents In The Adf; Adjusting The Contrast And Resolution Of A Document To Be Transmitted - Olivetti JET-LAB 600@ User Manual

INSERTING DOCUMENTS IN THE ADF ...

1.
Fan thoroughly and square up the documents
(max. 25 sheets) to be loaded in the automatic
document feeder (ADF).
2.
Insert the documents face down in the ADF slot,
without forcing them. The documents must be
slightly staggered.
3.
Adjust the paper guides according to the width of
the original(s).
Make sure that the document thickness lever is in the
correct position (to the left for normal paper and to the
right for thick or special paper).
ADJUSTING THE
RESOLUTION OF A DOCUMENT TO BE
TRANSMITTED...
Before transmitting you can make some adjustments
in order to optimise the print quality. In particular,
you can adjust the print contrast using the
appropriate menu to select a lighter or darker tone
key to adjust the definition of the
and use the
characters by setting higher or lower resolution values
depending on the type of text or images in the
document.
Select the type of contrast as follows ...
1.
Make sure that the display shows the initial waiting
mode and the date and time.
RX ON FAX
02-10-99
2.
Insert the document in the ADF. The display will
show the type of resolution set: «NORMAL».
NORMAL
DOCUMENT READY
3.
Press the FUNCTION key.
1.MEMORY TX
4.
Press 8 on the numeric key pad
8.SETUP
26
CONTRAST AND
100%
15:29
100%
/1-9
/1-9
5.
Press the START key.
DATE AND TIME
6.
Press the FUNCTION key until the display shows:
VARIOUS SETTINGS
7.
Press the START key.
CONTRAST:NORM.

         
Press the
available: «CONTRAST:LIGHT»
«CONTRAST:DARK».
CONTRAST:DARK
8.
Press the START key to confirm your choice, then
press the STOP key to return the fax machine to
its initial waiting mode.
RX ON FAX
02-10-99
Choose the type of contrast as follows:
• NORMAL, if the document is neither too light nor
too dark.
• LIGHT, if the document is particularly dark.
• DARK, if the document is particularly light.
and
100%
15:29
F
ACSIMILE