Olivetti JET-LAB 600@ User Manual page 72

Reducing transmission speed ...
The fax machine normally transmits at a speed of
14400 bps ( b its p er s econd). A transmission speed of
9600 or 4800 bps is advisable for disturbed
telephone lines .
1.
Ensure that the display shows the initial waiting
mode and the date and time.
RX ON FAX
29-10-99
2.
Press the FUNCTION key.
1.MEMORY TX
3.
Press 8 on the numeric key pad.
8.SETUP
4.
Press the START key.
DATE AND TIME
5.
Press the FUNCTION key.
VARIOUS SETTINGS
6.
Press the START key until the display shows:
SPEED. TX:14400

     #  
7.
Press the
available: SPEED TX:9600 and SPEED. TX: 4800.
SPEED TX:4800
8.
Press the START key to confirm this choice, then
press the STOP key to return the fax machine to
the initial waiting mode.
RX ON FAX
29-10-99
F
ACSIMILE
100%
16:28
/1-9
/1-9
100%
16:28
Enabling/disabling ECM mode ...
The ECM ( Error Correction Mode ) is a system for
correcting errors caused by disturbance on the line.
This feature is only effective if it has been enabled on
both your fax machine and that of the remote party,
and is shown by an " E " on the display.
The fax machine is already set to transmit in this
mode. You can also set it to transmit in normal mode
in the following way:
1.
Make sure the display shows the initial waiting
mode and the date and time.
RX ON FAX
29-10-99
2.
Press the FUNCTION key.
1.MEMORY TX
3.
Press 8 on the numeric key pad.
8.SETUP
4.
Press the START key.
DATE AND TIME
5.
Press the FUNCTION key.
VARIOUS SETTINGS
6.
Press the START key until the display shows:
ECM: YES

        
7.
Press the
available: ECM: NO.
ECM: NO
8.
Press the START key to confirm this choice, then
press the STOP key to return the fax machine to
the initial waiting mode.
RX ON FAX
29-10-99
100%
16:28
/1-9
/1-9
100%
16:28
57