Table of Contents
Advertisement
Preparing the document for transmission
(polling transmission)...
1.
Make sure that the display shows the initial waiting
mode and the date and time.
RX ON FAX
29-10-99
2.
Insert the document into the ADF.
NORMAL
DOCUMENT READY
3.
Choose the contrast and resolution you believe to
be suitable.
4.
Press the FUNCTION key.
1.MEMORY TX
5.
Press 5 on the numeric key pad.
5.TX POLLING
6.
Press the START key. The fax machine begins
storing the document. While the document is
being stored, the message «MEMORIS. #XXXX»
will be shown. When finished, the number of
pages stored will be displayed for a few seconds,
after which the machine will return to the initial
waiting mode.
RX ON FAX
POLL TX SET.
60
100%
14:42
100%
/1-9
/1-9
97%
Cancelling polling transmission already set ...
1.
Make sure you have set polling transmission.
RX ON FAX
POLL TX SET.
2.
Press the FUNCTION key until the display shows:
1.MEMORY TX
3.
Press 5 on the numeric key pad.
5.TX POLLING
4.
Press the START key.
ALREADY BOOKED
5.
Press the START key.
PRINT DOCUMENT
Press the START key immediately to print a
document
previously
transmission. When printing is completed, the fax
machine returns to the initial waiting mode
automatically.
To remove a document from the memory, use
the following procedure:
6.
Press the
available: «CANC. SETTINGS.»
CANC. SETTINGS.
7.
Press the START key to confirm this choice. The
fax machine returns to the initial waiting mode
automatically.
RX ON FAX
29-10-99
On the basis of «POLL.TX:MULTIPLE/SINGLE»
settings in the «VARIOUS SETTINGS» menu, the
document will be kept in / eliminated from the
memory after being transmitted.
97%
/1-9
/1-9
stored
for
polling
100%
14:42
F
ACSIMILE
Advertisement
Table of Contents
