Olivetti JET-LAB 600@ User Manual page 54

11.
Press the START key to confirm your setting.
SECURITY:YES


If you do not wish to transmit in confidential mode

      
press the /
available: «SECURITY:NO», and then press the
START key and move on to step 15.
12.
Press the START key to set the security
functions.
1:MBOX ID
_
13.
Type in the confidential box's identity number
(max. 20 digits), and press the START key to
confirm the setting.
1:MBOX.ACC.C.
_
14.
Type in the recipient's confidential mailbox code
(max. 20 digits) and press the START key to
confirm the setting.
OTHER:YES
15.
You can now programme another one-touch dial
numeric key by pressing the START key and
repeating the procedure in step 7, or you can leave
this procedure and return the fax machine to the
initial waiting mode by pressing the STOP key.
F
ACSIMILE
Associating an Internet address:
If you wish to associate an Internet address to a one-
touch dial key rather than a fax number, follow points
1 to 7 in the procedure above and then continue
as follows:
The FAX/TEL NUM. field MUST be empty. If there
are characters in this field, the @ key will NOT be
accepted and an acoustic signal indicating
incorrect operation will be emitted.
CLEAR key to cancel any characters, and then
press the @ key again.
8.
Press the @ key on the operator panel; the
display shows:
1:ADDRESS
_
9.
Type in the entire address, using the alphanumeric
keypad; the alphabetical characters are displayed
in lower case. If the address contains upper case
characters, press the F (FUNCTION) key to insert
them.
10.
Press the START key to confirm the selection. The
fax machine will ask you to type in the name
associated with the internet address:
1:NAME
_
11.
Type in the name (max. 16 characters).
12.
Press the START key to confirm the setting; the
display will show:
OTHER: YES
13.
You can now programme another one-touch dial
key by pressing the START key and repeating the
procedure. Otherwise, you can exit from this
procedure by pressing the STOP key and return
the machine to the initial waiting mode.
Press the
39