Table of Contents
Advertisement
if you pick up the handset before the second ring and hear the fax tone, press the START key and replace the
handset. Your fax machine is now ready to receive.
If your telephone installation has several sockets, you can set your fax machine for remote reception (REMOTE)
as explained in "Manual Reception".
If your telephone installation has several sockets, you can connect to the line within 20 seconds from a
secondary set, provided it works with tone (multi-frequency) dialling: lift the handset and press the
Receiving with an answering machine ...
• If your fax machine has an answering machine
and you have set it to receive in this mode by
pressing the RX MODE key (the display must
show « FAX/TAD»), make sure that:
• the answering machine is switched on.
• the number of rings before the answering
machine will answer is less than 5.
• the silence lapse (the time after which the
answering machine hangs up if it does not
detect either a reply message or the
connection tones) set on the answering
machine is longer than that set on the fax
The caller listens to the message recorded on the answering machine.
If a FAX MACHINE is
calling.
Your fax machine prepares
automatically to receive.
F
ACSIMILE
After the number of
set on the fax machine.
If the caller wants to send a fax.
The caller presses the start
transmission button.
Your
fax
machine
automatically to receive.
machine (to change the time set on your fax
machine; see "Changing the silence lapse"
in "For more sophisticated use").
• the message recorded in the answering
machine does not exceed 15 - 20 seconds.
In some countries, in the " FAX/TAD reception mode
you can also access the service for recognition of
the ring frequency (see "For more sophisticated
use").
The behaviour of your fax machine depends on the
caller, as shown in the following diagram:
If the caller only wishes to
talk.
The caller leaves a message
after the beep.
prepares
*
#
and
keys.
37
Advertisement
Table of Contents
