Olivetti JET-LAB 600@ User Manual page 67

6.
Press the START key.
DIST. RING
7.
Press the START key.
DIST.RING:NO

  $        
8.
Press the
DIST.RING:YES
The message "DIST. RING:YES/NO», indicating
the possibility of listening to ring tones, will be
shown only when a particular tone has been
memorised.
9.
Press the START key.
CHANGE TONE:YES
10.
Press the START key.
FAX CALL
11.
Press the START key.
SELF-CHECK
12.
Call the fax machine with the tone required to
allow the machine to recognise it. The message
"REGISTERED" should show up on the display.
13.
Press the STOP key to return the fax machine to
the initial waiting mode.
FAX/PHONE
28-10-99


If the fax machine does not recognise that
specific tone, the display will show "NOT
REGISTERED". Now press the STOP key and
repeat the procedure from the beginning.
52
Changing the duration of the beep...
When the fax machine is set for automatic reception
and recognition of call type , it operates in the
following way:
• if the caller is a fax machine, it will automatically
• if the caller is a telephone , it will emit a beep,
You can change the duration of the beep in the
following way:
1.
2.
3.
4.
5.
100%
6.
16:28
7.
prepare to receive after the set number of rings,
after which, if you have not yet lifted the handset, it
will automatically prepare receive.
Ensure that the display shows the initial waiting
mode and the date and time.
FAX/PHONE
28-10-99
Press the FUNCTION key.
1.MEMORY TX
/1-9
Press 9 on the numeric key pad.
9.INSTALLATION
/1-9
Press the START key:
TEL.LINE SETUP
Press the START key until the display shows:
TEL/FAX TIME: 20

       #  
Press the
available: «15», «30» and «40».
TEL/FAX TIME: 15
Press the START key to confirm this choice and
then the STOP key to return the fax machine to
the initial waiting mode.
RX FAX/TEL
28-10-99
100%
16:28
100%
16:28
F
ACSIMILE