Types Of Paper - Olivetti JET-LAB 600@ User Manual

Single sheets
For instructions on loading standard format single
sheets, see the «LOADING PAPER ...» section in the
INSTALLATION chapter.
Envelopes
In print mode, the machine can handle envelopes
with a weight of 80g/m 2 . You can load up to 10 at a
time in the ASF.
Envelopes must be inserted, short side first, with the
print side facing upwards, and the flap to the left.
Cards
In print mode, the machine can handle two types of
cards: plain paper and photo paper. You can load up
to 10 plain paper cards or 5 cards of photo paper
cards at a time in the ASF.
Banner
In print mode , the machine can handle banners up to
1.5 metres long (5xA4 format sheets). The banner
must be fed manually into the back of the machine.
For correct use, your print application must also be
able to handle banner printing.
18

TYPES OF PAPER:

For optimum print quality, only print media
recommended by the manufacturer should be used
(see CONSUMABLE MATERIALS). The use of
unsuitable print media can cause problems with
insertion and/or poor print quality.
The machine can handle the following types of paper
in the ASF:
Plain paper
Use good quality office or photocopy paper.
Special print/copy media
All these types of special media can be handled
automatically only in printer mode.
When using any special print media, read the
instructions on the pack carefully.
Coated paper
This type of paper has a high quality print surface.
Packs of up to 50 sheets (weight 90 g/m
can be loaded into the ASF.
Photo paper
This type of paper has a gloss finish to give a
professional touch to your prints. Packs of up to 20
sheets at a time can be loaded into the ASF.
Glossy paper
This type of paper has a surface similar to that used in
the photographic industry. Packs of up to 20 sheets at
a time can be loaded into the ASF.
Transparencies
Use only transparencies that are specifically
recommended for ink jet printers. They are the only
type that absorb the ink properly. Packs of up to 50
sheets at a time can be loaded into the ASF.
Labels
Use only standard format labels that cover the entire
surface of the sheet. Avoid using paper that is pre-
punched or that has borders or edges that can be torn
off. Packs of up to 20 sheets at a time can be loaded
into the ASF.
T-shirt transfers
Use only transfers that are specifically recommended
for ink jet printers. They are the only ones able to
absorb the ink properly. They can be loaded into the
ASF one at a time.
P
APER AND OTHER PRINT MEDIA
2 ) at a time