Information On The Driver Settings; Selecting The Machine As Your Output Device - Olivetti JET-LAB 600@ User Manual

INFORMATION ON THE DRIVER SETTINGS

Access to the information on the Settings tab can be
obtained in several different ways:
•
pointing the mouse at any setting for more than 3
seconds will activate a flash explaining the
function of the setting. The flash will disappear as
soon as the mouse is moved,
•
choosing the setting required, and right clicking
the mouse,
•
selecting ? in the top right hand corner of the
window and dragging it on to the required setting,
•
clicking on the HELP button in the bottom right
corner of the window. This accesses the entire
section relating to the Settings window.
90
SELECTING THE MACHINE
OUTPUT DEVICE
The machine is usually set as the default output
device during installation of the printer driver. If you
have not already done this, you can proceed as
follows:
In Windows  95/98/NT, click on Start and on
Printers. At this point, double click on the printer
icon, then click on Printers and on Set as default.
If you do not wish to set the machine as the default
printer, you can choose it when printing.
For further information on operating the printer,
see the electronic documentation loaded when the
printer driver was installed.
AS YOUR
P
RINTER