Creating A Black List Of Excluded Numbers - Olivetti JET-LAB 600@ User Manual

CREATING A BLACK LIST OF EXCLUDED
NUMBERS ...
This feature is only available if the user's fax
machine is able to recognise caller identification.
To deny certain remote parties access to your fax
machine, you can insert their number (up to a max. of
10 numbers (0 to 9)) into a reception blacklist. If they
attempt to communicate with your fax machine, the
operation will be denied.
To create a "black list" or to add a number to it,
proceed as follows:
1.
Make sure that the display shows the initial waiting
mode and the date and time.
RX ON FAX
29-10-99
2.
Press the FUNCTION key until the display shows:
1.MEMORY TX
3.
Press 9 on the numeric key pad.
9.INSTALLATION
4.
Press the START key.
TEL.LINE SETUP
5.
Press the FUNCTION key until the display shows:
SECURITY
6.
Press the START key.
PROGR. ACC.PASSW.

            
7.
Press the
CALL. BLACK LIST
8.
Press the START key.
CALL. ID BARRIER
(0-9):
If the CALLER IDENTIFICATION feature is not
active/available, the procedure will be aborted.
66
100%
14:42
/1-9
/1-9
9.
Press any key on the numeric key pad.
The identifier "x" is displayed briefly in the lower
right corner, and then the display shows:
x:TYPE NUMBER
10.
Type in the fax/phone number to be associated
with the identifier "x" in the black list (20
characters, max.) and then press the START key.
OTHER:YES
If a number has already been associated with the
identifier "x", this will be shown on the second line
of the display.
11.
If you want to insert another fax/phone number in
the black list, press the START key,
CALL. ID BARRIER
(0-9):
and repeat the procedure from point 9 .
If you do not want to insert another number,
  
press the
OTHER:NO
Press the START key to go on to the next menu
or the STOP key to return to the initial waiting
mode.
To re-use an identifier that has already been
assigned, when the display shows:
x:TYPE NUMBER
XXXXXXXXXXXXXXXXXXX_
type in the new number that you wish to insert in the
black list and press the START key to confirm the
setting. The number previously associated with this
identifier will be cancelled.
To remove a number from the black list, when the
display shows:
x:TYPE NUMBER
XXXXXXXXXXXXXXXXXXX_
press CLEAR key and then the START key
F
ACSIMILE