Operator Panel - Olivetti JET-LAB 600@ User Manual

The key names on the operator panel are in English. Stick-on templates in other languages are supplied. Apply the
template containing the language you required to the key pad to the left of the display.
In Fax Mode, some keys have more than one function; the particular function will depend on the current operating
status of the FAX MACHINE:
• Waiting mode, when the fax machine is inactive.
• Programming mode (access to the menu), after pressing the F (FUNCTION) key.
• Communication mode, during transmission or reception.
• Connect mode, after pressing the LINE key or lifting the handset.
The following keys,
located immediately below the LCD display, are used for COPYING operations. Their functions are de-
scribed in the Copier chapter.
Starting from the left:
RX MODE
With the machine in waiting mode, selects the
various reception methods.
With the machine in programming mode, moves
back to choose setting values.
On pressing the
waiting mode, moves back to select one of the
last ten telephone or fax numbers dialled.
HOLD
With the machine in connect mode, puts the line
on hold.
O
PERATOR PANEL
key, with the machine in

OPERATOR PANEL

SPEED DIAL
With the machine in waiting mode, and followed
by two numeric keys (01-50), automatically se-
lects a contact's telephone / fax number or
internet address (where programmed).

         
The
for one-touch and speed dialling).
CANCEL
With the machine in programming mode, can-
cels incorrect settings.
VII