Scanning - Olivetti JET-LAB 600@ User Manual

To use the machine as a scanner, you must first:
•
Install the machine completely (see Installation).
•
Make sure that both the machine and the PC are
switched on.
At this stage:
1.
Insert the document you want to scan into the
ADF.
2.
Open the LinkFax Pro@ remote panel on your PC
screen.
3.
Click the SCAN button on the remote panel.
The TWAIN scanner driver window will open and
the fax machine will scan the document.
When scanning is completed, the driver window
closes and another window opens to allow you to
save the file you have created.
4.
Follow the instructions shown.
or
1.
Open your scanning application (which must be
TWAIN-compatible).
2.
Choose a source.
3.
Start the image acquisition function (for example:
Import...).
4.
Insert the document you want to scan into the
ADF.
5.
Click on the SCAN tab on the scanner driver
window.
The scanning driver opens and the machine scans
the document.
6.
Once scanning is completed, the image will be
displayed on a page in your application.
S
CANNER
If the document consists of more than one page,
make sure that the ADF option is selected in the
driver window.
For further information on operating the scanner
from the PC and a complete description of the
functions contained on the video pages, consult
the electronic documentation installed along with
the scanner driver as well as that supplied with the
scanner application.
Using the OCR application that is loaded when
you install "Unimessage" by WordCraft, you can
convert a file obtained in a scanning operation
into an editable file. For further information,
consult the electronic documentation loaded on
your PC hard disk when you installed the
application.

SCANNING ...

93