Configuring The Fax Machine To The Telephone Line; Connecting - Olivetti JET-LAB 600@ User Manual

CONFIGURING THE FAX MACHINE TO THE TELEPHONE LINE ...

CONNECTING

TO A PUBLIC LINE
The fax machine is already set for connection to a
public line. Nevertheless, it is best to check that:
• the "PUBLIC LINE" parameter is selected
• the dialling mode selected (tone = multifrequency
or pulse = decadic) corresponds to that of the
public telephone exchange to which the fax
machine is connected. If in doubt about the
selection to be made, ask the public telephone
network manager.
In some countries the pulse dialling mode is not
available. In this case. the fax machine will not show
the messages given in steps 5 and 6 of the following
procedure:
1.
Make sure that the display shows the initial waiting
mode, and the date and time.
RX ON FAX
02-10-99
2.
Press the FUNCTION key.
1.MEMORY TX
3.
Press 9 on the numeric key pad.
9.INSTALLATION
4.
Press the START key.
TEL. LINE SET-UP
5.
Press the START key.
PUBLIC LINE


If the fax machine is set for connection to "Private
         
Line", press the
"Public Line".
6.
Press the START key.
PSTN DIAL: TONE
F
ACSIMILE
100%
15:29
/1-9
/1-9

           
7.
Press the
mode: «PSTN DIAL: PULSE».
PSTN DIAL: PULSE
8.
Press the START key to confirm the selection and
then the STOP to restore the fax machine to the
initial waiting mode.
RX ON FAX
02-10-99
Connecting to a Private Line (PBX)
To connect your fax machine to a private line and to
be able to use it on a public line as well, you have to:
• select the "PRIVATE LINE " parameter,
• set the dialling mode (tone or pulse) to the one
used by the private telephone exchange
(switchboard) that manages the line to which the
fax machine has been connected. If in doubt about
the selection to be made, ask the private
telephone network manager,
• set the output mode (area code or flash) to access
the public telephone exchange from the private
telephone exchange (switchboard),
• adjust the dialling mode (tone or pulse) to the one
used by the public telephone exchange.
In some countries the pulse dialling mode is not
available. In this case the fax machine will not show
the messages given in steps 6, 7, 10 and 11 in the
following procedure:
1.
Make sure that the display shows the initial waiting
mode and the date and time.
RX ON FAX
02-10-99
2.
Press the FUNCTION key.
1.MEMORY TX
3.
Press 9 on the numeric key pad.
9.INSTALLATION
100%
15:29
100%
15:29
/1-9
/1-9
23