What Documents Can Be Inserted In The Adf; Making A Copy - Olivetti JET-LAB 600@ User Manual

key (QUALITY)
This key allows you to choose the quality of the copy
produced.
The default setting (DRAFT) is shown when the key is
pressed once.
The only other alternative is HIGH QUALITY.
Default values are reinstated two minutes after
copying finishes, or after two minutes of inactivity.
key (B/W COPIES)
This key prepares the machine for making black and
white copies. The first time you press this key, you will
be asked to type in the number of copies required. To
begin copying, press the key a second time.
COLOUR COPIES
This key starts the colour copying process.
WHAT DOCUMENTS CAN BE INSERTED IN
THE ADF...
Dimensions
• Width min. 148 mm - max. 216 mm
• Length min. 216 mm - max. 600 mm
Thickness
2
From: 60 - 90 g/m (max. 25 sheets)
50 - 340 g/m 2 (1 sheet at a time)
For small formats and light-weight originals, use the
document holder supplied with the machine.
Remember to position correctly the paper thickness
lever on the ADF.
84

MAKING A COPY ...

First ensure that the machine is switched on, with the
print head inserted, and ready to work (initialising
cycle completed) - the display will show:
RX ON FAX
29-10-99
Proceed as follows:
1.
If necessary, load paper into the ASF and check
that the format corresponds to what is set on the
Configuration menu (see "Paper and other print
media").
2.
Place the document to be copied, face down, into
the ADF. Check that the original thickness lever is
in the correct position: to the left for plain paper,
and to the right for special paper.
3.
If necessary, set the light/dark and/or saturation
required, using the IMAGE key.
The SATURATION setting does not effect black
and white copies.
4.
If necessary, set the reduction/enlargement
required using the REDUCTION/ENLARGE-
MENT key.
5.
Set the type of paper onto which the copies will
be printed, using the PAPER key.
6.
Set the copy quality using the QUALITY key.
7.
Set the type of copy pressing the B/W COPY or
COLOUR COPY key.
8.
If you have set a password to limit the use of the
copier, you will now be asked to type it. Type it
and then press the START key:
• if you have pressed the COLOUR COPY key,
the copy will be made immediately.
• If you have pressed B/W COPY, you will have
to type in the number of copies required.
9.
Type in the number of copies required, using the
numeric keypad.
10.
Press the B/W COPY key to begin copying.
100%
14:42
P
HOTOCOPIER