Ftp Encrypted Tx - Kyocera 6550ci Operation Manual

FTP Encrypted TX

This allows you to encrypt documents when you send them. If you select [On] in this option, you can then select
the encryption method in the basic send screen.
Use the procedure below to scan and send originals as encrypted files.
1
Press the Send Key.
2
Place the originals in the document processor or on
the platen.
3
Press [Advanced Setup], [
Encrypted TX].
4
Press [On].
5
Press [OK].
NOTE:
You can only change the settings by logging in
with administrator privileges.
Refer to Adding a User on page 10-5 for the default
login user name and password.
Click Settings -> Advanced -> Secure Protocols in the
Command Center RX. Be sure that SSL of Secure
Protocol Settings is On and one or more effective
encryption are selected in Clientside Settings. For
details, refer to the Command Center RX Operation
Guide.
6-37
Sending Functions
], and then [FTP
6