Os Level 3: Printer Problem - Xerox DocuPrint 180 Message Manual

OS Level 3: Printer problem

XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
Indicates specific Xerox DocuPrint 180 LPS problems and explains
what action(s) to take.
OS3001 Check printer doors and top covers
A door or cover on the printer is not closed correctly. The printer
control console message display indicates which door/cover is open.
The printer control console displays one of the following:
CLOSE LEFT DOOR
CLOSE MIDDLE DOOR
CLOSE RIGHT COVER
CLOSE RIGHT DOOR
CLOSE SAMPLE TRAY
Action Firmly close the door or cover indicated in the message display.
OS3002 Paper Tray 1 fault--see message at printer
Feed tray 1 has not risen completely.
The printer control console displays one of the following:
IF FAULT continues, SWITCH JOB TO PAPER TRAY 2 AT CRT
PAPER TRAY FAULT. OPEN MIDDLE DOOR, OPEN AND CLOSE
PAPER TRAY. PRESS i.
Action 1. Press the i button on the printer control console for further
console messages if the printer control console display instructs
you to do so.
2. Pull out feed tray 1, then push it all the way back in.
3. If the tray does not rise, enter the FEED 2 command to switch
to another tray to complete the job.
4. If the problem continues, contact your systems specialist or
Xerox Customer Service.
Note: CRT refers to the Xerox DocuPrint 180 LPS system
controller display.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-71