Xerox DocuPrint 180 Message Manual page 105

XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
OS1400 Sample ignored...Printer idle
The <SAMPLE> key was pressed while the printer was not in the
process of imaging a page. The system could not produce a sample
page when the key was pressed.
The printer control console displays:
SAMPLE CANNOT BE PRINTED--PRINTER IS IDLE.
Action Continue pressing the <SAMPLE> key until sample page is
delivered.
OS1401 Sample ignored... already in progress
Your first request for sample(s) is being processed; your second
request is not accepted.
Action None.
OS1405 No files found to sample print
The system is unable to find file for the requested print sample on the
system disk.
Action Load the desired file to disk and reenter the SAMPLE
filename.filetype command.
OS1410 Sample not allowed by JDE
The <SAMPLE> key was pressed but JDE specified ABNORMAL
SECURITY = YES. The system cannot produce a sample print.
The printer control console displays:
SAMPLE CANNOT BE PRINTED--SEE MESSAGE AT THE CRT.
Action None.
OS1412 Cannot sample a secured file
The file you requested is restricted and cannot be sampled.
Action None.
OS1415 Sample of Kanji fonts not allowed
The SAMPLE command was entered, requesting a Kanji (Japanese)
font, which may not be sampled.
Note: This message should not appear on systems not sysgened for
Japanese. If it does, the requested font is corrupt, causing a false
message.
Action 1. Retry the SAMPLE command, ensuring that you are requesting
a font that may be sampled.
2. If the message reappears, contact your systems specialist or
the Xerox Font Center for assistance with replacing the font.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-27