Xerox DocuPrint 180 Message Manual page 210

PDL (JOB SOURCE LIBRARY COMPILATION) MESSAGES
7-2
PD0250 Replace denied by operator.
The operator has specified NOREPLACE in the PDL invocation line.
No action is needed.
Action None.
PD0300 Nothing to print, PDL terminated.
When PDL encounters a problem before it starts compiling the JSL
file, it will display this message and exit. The JSL file was not
processed at all.
Action None.
PD0500 No source file will be created.
A source file cannot be created due to an unspecified error.
Action Check the file and make corrections, if needed. (Refer to your Xerox
DocuPrint 180 LPS PDL Reference .)
PD0510 Source file is full.
1000 records (maximum allowable) have been written to the source
file.
Action Copy records to disk and compile them.
PD0900 Abort requested by operator.
The ABORT command was entered. The PDL task will be cancelled.
Action None.
PD1000 PDL terminated.
End of Job Source Library has been reached.
Action None.
PD1050 Exiting PDL to print.
JSL has been successfully compiled. The system will print a listing of
JSL.
Action None.
PD1100 **JSL CONTAINED ERRORS***
Job Source Library contained some incorrect entries.
Action 1. Check the specified feature setting.
2. Edit JSL entries.
3. Recompile JSL. (Refer to your Xerox DocuPrint 180 LPS PDL
Reference .)
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE