Xerox DocuPrint 180 Message Manual page 39

XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
5.
These messages appear when the Interpress font utility program
(Refer to your Xerox DocuPrint 180 LPS Operations Reference
chapter on HIP-accessed communicating modes for additional
information.) The meaning of terms used in this section can be found
in the Glossary at the back of the message guide.
IF1000 Exit IFU to print
This message advises that you must either exit IFU before printing
your job or IFU is exiting to print a job.
Action If IFU has not exited to run the print job, enter the END command to
return control to the operating environment and to invoke the print
job.
IF1010 Compiling map xxxx
The requested map is being compiled.
Action None.
IF1020 Compiling IPFONTS from FIS master xxxx
IPFONTS (Interpress fonts) are being compiled from the requested
FIS master during execution of the ADD command.
Action None.
IF1021 Compiling DCFONTS from FIS master xxxx
DCFONTS (data center fonts) are being compiled from the requested
FIS master during execution of the ADD command.
Action None.
IF1030 Family x does not exist in directory
This is an informational message stating that the IPM (Interpress
mapping) file directory does not have the requested font family.
Action None.
IF1061 Consolidating unreferenced character mapping tables
This is an informational message.
Action None.
5IFU (Interpress font utility)
messages
5-1