Xerox DocuPrint 180 Message Manual page 43

XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
IF1629 Parser error
There is a problem with parsing the parameters within a command.
Action None.
IF2000 Aborting ADD
The ADD command to add font families to the Interpress or data
center font environments has been aborted.
Action None.
IF2001 Aborting DCFONTS add
The ADD command to add font families to the DCFONTS (data
center fonts) environment has been aborted.
Action None.
IF2002 Hardvalues requires RIP option; aborting ADD
Either the point size, orientation, or resolution (hardvalues)
requested does not match what is in the FIS font master
(easyvalues). Requesting hardvalues requires RIP. The ADD
command is therefore being aborted.
Action None.
IF2005 Terminated. Font profile contains syntax errors
There is a syntax error in the font profile.
Action Look for possible syntax errors in the font profile and retry the
command.
IF2010 Medium parameter must be a symbol
The part of the command that defines the medium to be used (tape,
floppy, cartridge, etc.) must be written as a single, acceptable word.
Action Reenter the statement using an acceptable format.
IF2011 Medium parameter must be TAPE, FLOPPY, or CARTRIDGE
The part of the command that defines the medium to be used must
be either TAPE, FLOPPY, or CARTRIDGE.
Action Reenter the statement to specify the appropriate medium.
IF2020 Font mask is invalid
In the READ or WRITE statement, the font name mask (complete
font family name) has an invalid parameter.
Action Reenter the command, using valid parameters in the READ or
WRITE statement.
IFU (INTERPRESS FONT UTILITY) MESSAGES
5-5